Roofing mastic ICOPAL
- Category: Waterproofing
- Brands: ICOPAL
Composition of high quality petroleum bitumen and organic solvents, mineral filler and plasticizers. The product is ready for application.
Composition of high quality petroleum bitumen and organic solvents, mineral filler and plasticizers.
The product is ready for application.
See less
-
PARAMETER ITEM, MEASURE UNIT
VALUE
Average flow rate per layer, kg/m2
1,5
Drying time at +20°С, hr, not more
24
Dry residue melting point, °С, not less
90
non-volatile matter content, %, not less
60
concrete bond strength, MPa, not less
0,1
Water absorption rate during 24 hours, by weight, %, not above
2
Radius of curvature with radius at bent 5 mm ± 0.2 at the temperature of -5°С, not above
In compliance
Waterproofing under a pressure of 0.001 MPa during ten minutes
No signs of water leak
- High water penetration resistance;
- ductility;
- Heat resistance.
Mastic roofing, sealing seams and cracks of roof coverings, sealing of joints, gluing of roll bituminous materials, vapor barrier.
delivery
- When purchasing products for up to 100 GEL, the delivery price is 6 GEL;
- When purchasing products in the amount of 100 to 500 GEL, the delivery price is determined on the basis of: 1 km - 1.50 GEL;
- When purchasing products worth more than GEL 300, delivery is free (Tbilisi);
- The cost of delivery outside the city is determined at the rate: 1 km - 2 GEL.
Delivery time:
- Tbilisi | Rustavi | Mtskheta | Kutaisi | Batumi
Delivery time: 3-5 working days
- Out of town:
Delivery time: 4-5 working days
Note: Delivery is carried out only to the address, without unloading from the car and delivery to the apartment.
Product comparison
Roofing mastic ICOPAL
choose a product
-
PARAMETER ITEM, MEASURE UNIT
VALUE
Average flow rate per layer, kg/m2
1,5
Drying time at +20°С, hr, not more
24
Dry residue melting point, °С, not less
90
non-volatile matter content, %, not less
60
concrete bond strength, MPa, not less
0,1
Water absorption rate during 24 hours, by weight, %, not above
2
Radius of curvature with radius at bent 5 mm ± 0.2 at the temperature of -5°С, not above
In compliance
Waterproofing under a pressure of 0.001 MPa during ten minutes
No signs of water leak